SURE : Vortex Flow Meter LUGB

   SURE : Vortex Flow Meter LUGB The vortex flow meter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline The periodic shedding of eddies occurs first from one side and then from the other side of a bluff body (vortex-shedding body) installed perpendicular to the pipe axis. Vortex shedding generates a so-called "Karman vortex street" with alternating pressure conditions whose frequency is proportional to the flow velocity.

   SURE : Vortex Flow Meter LUGB Description

■ ASIC large scale integrated circuit design, small size
■ Low current offset≤ 50uV，temperature drift<1uV/?C
■ Programmable filter for aperiodic vibration remove
■ Intelligent control, no need to manual debugging

   Technical Data

Application range	(1)Gas;(2)Liquid;(3)Steam
Primary measured value	Flow Rate
Secondary measured value	Volume flow; (Pressure and Temperature is available )
Process Temperature	T1 Level:-20...+100℃ T2 Level:-20...+250℃ T3 Level:-20...+350℃
Body Material Cast Aluminium	SS 304 SS 316 Body Material Cast Aluminium Cast Steel (D4:DN50-DN200)
Ambient Temperature	-10...+70℃
EN 1092-1	DN200?DN300: PN10 DN100?DN200: PN16 DN15?DN80: PN25 Other pressures on request
ASME B16.5	1/2"?8":150lb RF Other pressures on request
JIS	1/2"?8": 10K Other pressures on request
Reference conditions	Flow conditions similar to EN 29104 Medium: Water/Gas/Steam Electrical conductivity:≥300uS/cm Temperature: -10?+30℃ Inlet section:≥10 DN Operating pressure: 1bar/14.5 PSIG
Flow Meter Accuracy	For Liquid: 1.0% of Rate For Gas and Steam: 1.5% of Rate
Body Material	SS304 SS316
Converter Material	Standard: Polyurethane coated die-cast aluminum